PTC Primer
PTC Stain Blocking Primer
PTC Tape Adhesive
Areas of Use
For application to new untreated plywood boards. For interior and exterior use.
For application to any other new untreated wooden surfaces. For interior and exterior use.
For application to any masonry and concrete substrates as a stabilising solution. For interior and exterior use.
For the effective blocking of various stains associated with plywood boards (PTC Stain BLocking Primer).
For the attachment of glass fibre jointing tape to any of the above surfaces (PTC Tape Adhesive).
Overview
Contains the most up to date, effective and environmentally friendly mould and algae resisters. Laboratory tested against a large range of fungus, algae and spores.
Almost any kind of top coat may be used, but primarily PTC Texture Finish.
Will not crack or craze during the movement of the substrates caused by normal expansion and contraction.
PTC Tape Adhesive is supplied in two sizes to suit all needs ie. 5 litre and 10 litre.
PTC Primers are supplied in three sizes to suit all needs ie. 5 litre, 10 litre and 20 litre.
Ready to use (may need any surface water stirring in - caused by long storage).
Cleaning of equipment is as simple as rinsing with clean tap water while still wet.
Supplied normally in white or beige but can be manufactured in almost any other colour (subject to our minimum order restrictions).
Application
Recommended application is by the use of a PTC Long Pile Roller, but may be brushed (small areas only) or sprayed.
PTC Tape Adhesive should be applied using a brush or small roller.
Coverage: 4 to 6m² per litre
Surface dry: 2 to 6 hours Thorough dry: 24 hours
Drying times are given only as a guide, as the atmospheric temperature and humidity will accelerate or retard the drying process.
Do not apply in temperatures below 5°C.
Do not apply externally if there is a possibility of frost or heavy rain.
Shelf Life
When supplied in 5 litre or 10 litre unlined pails - 12 to 24 months.
When supplied in 20 litre lined pails - up to 3 years.
Please note that there may be some separation after a period of time. This is perfectly normal and only requires stirring in.
Do not store in direct sunlight
Protect from frost
Do not store in plain metal tins
Store at temperatures between 5°C and 30°C
Substrate Preparation
All surfaces must be clean, dry and free from any loose or flaking material.
All fixing screws/nails should be galvanised, but as an extra precaution they should be painted over with an oil based metal primer (this is important as it will prevent rust spots at a later stage).
Whilst every effort has been made to ensure the accuracy of the information contained on this website, it is the responsibility of the end user to satisfy himself that the product is suitable for his needs.
HOME
