Areas of Use
For the over coating of PTC Texture Finish and on almost any type of ready coated surfaces both interior and exterior.
Overview
PTC Masonry Coat has a smooth like consistency.
Contains the most up to date, effective and environmentally friendly mould and algae resisters. Laboratory tested against a large range of fungus, algae and spores.
Will not crack or craze during the movement of the substrates caused by normal expansion and contraction.
Almost any colour can be supplied by arrangement (subject to minimum order restrictions).
Supplied in a range of sizes to suit all needs ie. 5 litre, 10 litre and 20 litre pails.
Ready to use (may need any surface water stirring in - caused by long storage).
Cleaning of equipment is as simple as rinsing with clean tap water while still wet.
Application
Recommended application is by the use of a PTC Long Pile Roller, but may be brushed (small areas only) or sprayed.
Coverage: 3 to 5m² per litre Surface dry: 2 to 6 hours Thorough dry: 24 hours
Drying times are given only as a guide, as the atmospheric temperature and humidity will accelerate or retard the drying process.
Do not apply in temperatures below 5°C.
Do not apply externally if there is a possibility of frost or heavy rain.
Shelf Life
When supplied in 5 litre or 10 litre unlined pails - 12 to 24 months.
When supplied in 20 litre lined pails - up to 3 years.
Please note that there may be some separation after a period of time. This is perfectly normal and only requires stirring in.
Do not store in direct sunlight
Protect from frost
Do not store in plain metal tins
Store at temperatures between 5°C and 30°C
Substrate Preparation
All surfaces must be clean, dry and free from any loose or flaking material.
All fixing screws/nails should be galvanised, but as an extra precaution they should be painted over with an oil based metal primer (this is important as it will prevent rust spots at a later stage).
Any new timber surfaces should first be primed using PTC Primer.
Any new brick or masonry should be stabilised with PTC Primer.
Consultation with the manufacturer is recommended.
Whilst every effort has been made to ensure the accuracy of the information contained on this website, it is the responsibility of the end user to satisfy himself that the product is suitable for his needs.
HOME
